System 2000 HD holder
Angle
25 degrees
Length
610-1220 mm
Width from the top edge of the mounting plate to the bottom edge of the square profile
179,5 mm
Width from the center of the mounting holes to the center of the pin holes143,6 mm
Hole dimension mounting holes18,5 mm
Hole dimension pin holes19,75 mm
Material
BOROX® 500HB
- For really tough conditions
- Long wear life
- With an additional wear plate attached to the mounting plate
- Easy rotating pins
- With a thick square profile 50 x 50 mm
- With a 20 mm thick cutting edge as a mounting plate
Description
BOROX® system 2000 HD for really tough surfaces, suitable for both gravel road maintenance and icy roads.
With its thick square profile 50 x 50 mm, a cutting edge as mounting plate and an extra wear plate attached, you get higher ground pressure and the best possible wear resistance.
The carbide pins can be found here and the standard S2000 holder can be found here.
Articles
|
Part number
|
Dimensions
|
|||||
| Road maintenance | Angle (degree) | Thickness (mm) | Length (mm) | Number of mounting holes | Number of pin holes | Note |
|
1610061
|
25
|
20
|
610 (2 feet)
|
4
|
16
|
-
|
|
1610915
|
25
|
20
|
915 (3 feet)
|
7
|
25
|
-
|
|
1610122
|
25
|
20
|
1220 (4 feet)
|
9
|
33
|
-
|
